Intermec EasyCoder 4100, Руководство пользователя

Страница: 35 / 282

1-11
Getting Started
1
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Printer Component Descriptions (Mechanism Detail)
The following table contains descriptions of the printer components as shown
in the previous illustration.
No. Name Description
1 Supply roll back stop Prevents the roll of unused media from rubbing against the
interior of the printer.
2 Supply roll retainer Secures the roll of unused media to the supply roll hanger.
3 Supply roll hanger Holds the roll of unused media.
4 Rewind adapter Guides printed media onto the rewinder hub during batch
take-up printing. (Shown in its storage position when not in
use).
5 Rewinder clasp Secures printed media or used media backing to the
rewinder hub.
6 Rewinder hub Collects printed media in batch take-up mode or media
bacing in self-strip mode.
7 Label adjust guide Guides media from the supply roll to the drive roller.
8 Head lift lever Disengages the printhead for loading media or ribbon and
for adjusting printhead alignment.
9 Label gap sensor adjustment Adjusts the label gap sensor, which scans the media for label
gaps or edges so the printer can determine where to start a
new label. Adjustable from 0.25" to 2.3".
10 Printhead Prints label formats as they are transmitted from the host
computer. The printhead resolution is 203 dots per inch
(DPI).
11 Printhead support adjust screw Moves the printhead support plate up or down to
accomodate narrow media.
12 Tear off plate Used for tearing off labels in straight-through printing mode.
13 Printhead support plate Supports the outer end of the printhead when narrow media
is used.
14 Ribbon rewind hub Collects used thermal transfer ribbon.
15 Ribbon clasp Secures used thermal transfer ribbon to the ribbon rewind
hub.
16 Ribbon supply hub Holds the supply of unused thermal transfer ribbon.
17 Ribbon supply back stop Prevents the roll of thermal transfer ribbon from rubbing
against the interior of the printer.