Intermec 6820 Series, Руководство пользователя

Страница: 91 / 184

Control Code Definitions
—
Chapter 5
75 6820 Series 80-Column Printer User’s Manual
Define Intercharacter Space
This function defines the amount of space to the right of each character, in
addition to the space allowed in the character design. The variable
n repre-
sents the number of units of space, with each unit equal to 1/120 of an
inch. Range of values for
n is 0–63 with a factory default of 0.
Format
Decimal Hex ASCII
27 32 n 1B 20 n ESC SP n
Select Italic Mode
The text (nongraphic) characters are italicized. Factory default disables
Italic mode.
Note that this function does not work well with DBCS or alter-
nate Single Byte Charater Sets (SBCS).
Format
Decimal Hex ASCII
27 52 1B 34 ESC “4”
Cancel Italic Mode
The italic mode, set by the Select Italic Mode function, is canceled. Note
that this function does not work well with DBCS or alternate SBCS.
Format
Decimal Hex ASCII
27 53 1B 35 ESC “5”
Master Select
Combinations of modes are allowed with this function. The variable n is
determined by combining values for the desired modes, by adding them
together.
Note that this function is not supported in DBCS.
Format
Decimal Hex ASCII
27 33 n 1B 21 n ESC “!” n
Valid combinations of the values in the following table include any com-
binations except that Pica cannot combine with Elite.
Example : Pica Compressed Italic Underlined, by adding values (00h +
04h + 40h + 80h), which results in C4h for the value of n .
Hex Value Mode
00h Pica
01h Elite
04h Condensed (compressed)
08h Emphasized