Intermec 6820 Series, Руководство пользователя

Страница: 85 / 184

Control Code Definitions
—
Chapter 5
69 6820 Series 80-Column Printer User’s Manual
Select Unidirectional (one line) Printing
Unidirectional printing is turned on, for the current line only. The con-
tents of the print buffer is printed, and cleared, before setting this mode.
This allows more accurate print positioning during text mode printing, for
the current line.
Format
Decimal Hex ASCII
27 60 1B 3C ESC “<”
Page Formatting Functions
This set of functions consists of control codes that change the formatting
for the page, such as page length, margins, line spacing, etc. The page
length (form length) and margin settings define the printable area on the
page. These settings need to conform to the actual size of the paper used in
the printer.
Page Length
Set Page Length (lines)
The length of the paper is set, in lines, where the range of n (number of
lines) is 1-127 (default = 66). Keep in mind the line spacing and actual
length of the paper when specifying this value, since this function is depen-
dent on those parameters. Top-of-Form is reset to the current line and the
Skip Over Perforation setting is canceled.
Format
Decimal Hex ASCII
27 67 n 1B 43 n ESC “C” n
Set Page Length (inches)
The length of the paper is set, in inches, where the range of n (number of
inches) is 1-22 (default = 11). Keep in mind the line spacing and actual
length of the paper when specifying this value, since this function is depen-
dent on those parameters. Also, Top-of-Form is reset to the current line
and the
Skip Over Perforation setting is canceled.
Format
Decimal Hex ASCII
27 67 0 n 1B 43 00 n ESC “C” NUL n