Intermec 6804DM, Техническое справочное руководство

Страница: 45 / 146

SECTION 3 781T Printer using Wireless Printing
Intermec Portable Printers Technical Reference Manual 3-5
vice. This parameter is currently only configurable in the
factory. If you would like the Service Offered to be some-
thing different, please discuss that with your Intermec rep-
resentative.
Automatic Ticket Voiding
This feature is enabled by adding a couple of esc sequences
to the beginning and ending of your session data. Once en-
abled, if a link loss is detected in the middle of your print
job, the printer considers the print job incomplete and will
automatically print a VOID marker on the output in prog-
ress.
To enable ticket voiding you must send an ESC followed by
bt1 (0x1b, 0x62, 0x74, x031) to mark the beginning of the
print job, and ESC followed by bt0 (0x1b, 0x62, 0x74, x030)
to mark the end. If the printer sees a Bluetooth disconnect
after the ESC+bt1 but before the ESC+bt0 is received, it
VOIDs the ticket.
781T Preparation
1. Prepare the 781T by holding down the red button for
about two seconds until you hear a short beep. This
means the printer is ready to go and will be discover-
able.
Any time you press and hold the button until it beeps,
you will dump any active wireless printing sessions.
2. You are ready to print wireless transactions.