Intermec 6804DM, Техническое справочное руководство

Страница: 102 / 146

!
Maintenance and Troubleshooting SECTION 5
5-6 Intermec Portable Printers Technical Reference Manual
4. The “Name” (see format above) is the name of the bar
code, font, graphic or line. There can be no spaces in
the name. A typo in the font name (e.g. MF225
instead of MF226) is a common error.
5. A vertical bar “|” follows the Name of what will be
printed and its field options (if any). A vertical bar “|”
signals the end of the data.
6. A right bracket “}” signals the end of the command.
Downloading Problems
Download via cable connect only, not infrared.
1. You cannot download your current configuration (see
Chapter 3) to the same COM--Port that is in use by
IrDA or any other device.
2. Prior to downloading, check battery by printing a self--
test and checking the “Batt Volt” to see that it is
“GOOD.” Alternatively, you can have the charger
plugged into the printer prior to download.
3. Paper must be properly installed (with lever down)
4. Check all cable connections.
5. Make sure the COM--Port you selected in your Config-
uration Program (see Chapter 3) is the same COM--
Port the printer is plugged into.
6. Do not toggle out of the Configuration Program during
download, as this could interrupt the download.