Intermec 6804DM, Техническое справочное руководство

Страница: 53 / 146

SECTION 4 Operation
Intermec Portable Printers Technical Reference Manual 4-5
4. Grab the tip and pull it through until the paper is
straight.
5. Push down the paper lever and insert the plastic pa-
per rod through the center of the paper roll.
6. Place the narrow end of the rod into the small hole on
the side of the paper cavity.
7. Snap the wider end into the cutout on the opposite
side of the paper cavity.
8. Turn the paper knob clockwise to tighten the paper
slack in the cavity.
9. Replace the end boot and tear off extra paper.
6804 and 6808 Series of Printers
1. Lift up the paper release lever. This takes the pres-
sure off the platen. Make sure you have a clean edge
on the new paper roll.
2. Take the edge of the paper and fold it 45 degrees.
Figure 4-3
Paper Fold
Fold