P/N 146626999-
1 (ML) • REV D • ISS 06MAY19
5 / 8
LED indication
PIR
Red LED
Alarm relay
To reset
Start up
Closed
Automatically after 25 s
Low voltage
Open (Alarm)
Apply correct voltage
PIR intruder
alarm
Open (Alarm)
Automatically after 3 s
PIR/AM
Red
LED
Yellow
LED
Alarm
relay
AM
relay
To reset
Start up
Closed
Closed
Automatically
after 60 s
Low voltage
Open
(Alarm)
Open
(Alarm)
Apply correct
voltage
PIR intruder
alarm
Open
(Alarm)
Automatically
after 3 s
Latched PIR
(Memory)
Switch to Night
mode
AM alarm
Open*
(Alarm)
Open
(Alarm)
See DIP
switch 3
After AM
reset
Switch to Night
mode
Technical
fault
Open
(Alarm)
Do a successful
walk test
Continuously on
Normal blinking (1 Hz)
Fast blinking (4 Hz)
* Depends on the setting of the DIP switch SW4.
Specifications
VE1120-D
VE1120AM-D
Detector
PIR
PIR with AM
Signal processing
V2E
Range
20 m
Optical
11 high-density mirror curtains
Memory
Yes
Input power
9 to 15 VDC (12 V nominal)
Peak-to-peak ripple
2 V (at 12 VDC)
Detector start-up time
25 s
60 s
Normal current
6.5 mA
10 mA
Current in alarm
1.2 mA
3.8 mA
Maximum current
(LED on)
11 mA
24 mA
Mounting height
1.8 to 3.0 m
(5.9 ft.to 9.8 ft.)
2.0 to 3.0 m
(6.6 ft.to 9.8 ft.)
Target speed range
30 cm/s to 3 m/s
(1 ft./s to 10 ft./s)
20 cm/s to 3 m/s
(0.65 ft./s to 10 ft./s)
Alarm (NC) / Tamper
relay characteristic
80 mA, 30 VDC,
resistive
80 mA, 30 VDC
Pry-off tamper (not
evaluated by UL/cUL)
Optional
Onboard (yes)
AM relay characteristic
—
80 mA
at 30 VDC max.
PIR Alarm time
3 s
Operating temperature
For UL/cUL installations
−10 to +55°C (14 to 130°F)
0 to 49°C ( 32 to 120°F )
VE1120-D
VE1120AM-D
Dimensions (H x W x D)
125 × 55 × 60 mm
(4.92 x 2.16 x
2.36 in.)
125 × 65 × 60 mm
(4.92 x 2.6 x 2.36 in.)
Relative humidity
95% max. noncondensing
Weight
150 g
IP/IK rating
IP30 IK02
Regulatory information
Manufacturer
PLACED ON THE MARKET BY:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
AUTHORIZED EU REPRESENTATIVE:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings
and disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE
TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. UTC FIRE & SECURITY
CANNOT PROVIDE ANY ASSURANCE THAT
ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY “AUTHORIZED
DEALER” OR “AUTHORIZED RESELLER”, IS
PROPERLY TRAINED OR EXPERIENCED TO
CORRECTLY INSTALL FIRE AND SECURITY
RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
European Union
directives
UTC Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see www.utcfireandsecurity.com or
www.interlogix.com.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.utcfssecurityproducts.eu/recycle/
Contact information
www.utcfireandsecurity.com or www.interlogix.com
For customer support, see www.utcfssecurityproducts.eu
