Interlogix IFS NS3502-8P-2S Скачать руководство пользователя страница 2

Страница: 2 / 568

IFS NS3502-8P-2S User Manual

Copyright

Interlogix is part of UTC Climate Controls & Security, a unit of United
Technologies Corporation. All rights reserved.

Trademarks and

patents

The IFS NS3502-8P-2S name and logo are trademarks of United
Technologies.

Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.

Manufacturer

Interlogix

3211 Progress Drive, Lincolnton, NC 28092 USA

Authorized EU manufacturing representative:
UTC Climate Controls & Security B.V.,
Kelvinstraat 7, 6003 DH Weert, Netherlands

Intended use

Use this product only for the purpose it was designed for; refer to the data

sheet and user documentation for details. For the latest product information,

contact your local supplier or visit us online at www.interlogix.com.

Certification

N4131

FCC compliance

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications.

You are cautioned that any changes or modifications not expressly

approved by the party responsible for compliance could void the user's

authority to operate the equipment.

ACMA compliance

Notice!

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to

take adequate measures.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme á la norme NMB-003du

Canada.

European Union

directives

2004/108/EC (EMC Directive):

Hereby,

UTC Climate Controls & Security

Corporation, Inc.

declares that this device is in compliance with the

essential requirements and other relevant provisions of Directive

2004/108/EC.

Contact Information

For contact information, see

www.interlogix.com

www.utcfssecurityproducts.eu

Содержание IFS NS3502-8P-2S

























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IFS NS3502-8P-2S

Отзывы:

Похожие инструкции для IFS NS3502-8P-2S

Бренды по названию

Популярные бренды

Interlogix IFS NS3502-8P-2S, Руководство пользователя

Результаты поиска

Содержание IFS NS3502-8P-2S

Отзывы:

Похожие инструкции для IFS NS3502-8P-2S

Бренды по названию

Популярные бренды