Interlogix IFS NS3502-8P-2S Скачать руководство пользователя страница 226

Страница: 226 / 568

IFS NS3502-8P-2S User Manual

226

Disabled

: Frames received on the port are not mirrored.

The default value is "Disabled".

•

Logging

Specify the logging operation of this port. The allowed values are:

Enabled

: Frames received on the port are stored in the System

Log.

Disabled

: Frames received on the port are not logged.

The default value is "Disabled".

Please note that the System Log memory size and logging rate is
limited.

•

Shutdown

Specify the port shut down operation of this port. The allowed
values are:

Enabled

: If a frame is received on the port, the port will be

disabled.

Disabled

Port shut down is disabled.

The default value is "Disabled".

•

Counter

Counts the number of frames that match this ACE.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

: Click to refresh the page; any changes made locally will be undone.

: Click to clear the counters.

4.10.5 ACL Rate Limiter Configuration

Configure the rate limiter for the ACL of the switch.
The ACL Rate Limiter Configuration screen in

Figure 4-10-5

appears.

Содержание IFS NS3502-8P-2S

























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IFS NS3502-8P-2S

Отзывы:

Похожие инструкции для IFS NS3502-8P-2S

Бренды по названию

Популярные бренды

Interlogix IFS NS3502-8P-2S, Руководство пользователя

Результаты поиска

Содержание IFS NS3502-8P-2S

Отзывы:

Похожие инструкции для IFS NS3502-8P-2S

Бренды по названию

Популярные бренды