IFS NS3502-8P-2S User Manual
337
5. COMMAND LINE INTERFACE
5.1 Accessing the CLI
When accessing the management interface for the switch over a direct connection to the server’s
console port, or via a Telnet connection, the switch can be managed by entering command keywords
and parameters at the prompt. Using the switch's command-line interface (CLI) is very similar to
entering commands on a UNIX system.
This chapter describes how to use the Command Line Interface (CLI).
Logon to the Console
Once the terminal has connected to the device, power on the Managed Switch, the terminal will
display that it is running testing procedures.
Then, the following message asks the login username & password. The factory default password as
following and the login screen in
Figure 5-1
appears.
Username:
admin
Password:
admin
Figure 5-1:
Managed Switch Console Login screen
1.
For security reason, please change and memorize the new password after
this first setup.
2.
Only accept command in lowercase letter under console interface.
Содержание IFS NS3502-8P-2S
Страница 1: ...IFS NS3502 8P 2S User Manual P N 1072687 REV A ISS 23OCT13 ...
Страница 44: ...IFS NS3502 8P 2S User Manual 44 Figure 3 5 SNMP management ...
Страница 164: ...IFS NS3502 8P 2S User Manual 164 Figure 4 8 1 Multicast Service Figure 4 8 2 Multicast flooding ...
Страница 198: ...IFS NS3502 8P 2S User Manual 198 ...
