r •
VIEW ZONE STATUS
1) Enter [
r
]-[
•
]
The LCD Screen will display the zone status.
2) Use the up and down scroll keys to
browse through the descriptions.
The LCD Screen will display the list of ALL zones in sequential
order by zone number
3) Press [
#
] to exit this function.
r
3
VIEW ALARM MEMORY
1) Enter [
r
]-[
3
]
The LCD Screen will display the zone description for the zones.
2) Use the up and down scroll keys to
browse through the alarm memory.
The LCD Screen will display the list in sequential order by zone
number.
3) Press [
#
] to exit this function.
r
4 4 TEST FUNCTION
1) Enter [
r
]-[
4
]-[
4
]
The test will be performed as programmed.
If the siren test is performed, enter a user code to silence the siren.
r
4 5 DISPLAY TEST FUNCTION
1) Enter [
r
]-[
4
]-[
5
]
All of the display pixels and LED indicators will flash.
2) Press any key to end test.
r
4 6 LIGHT CONTROL FOR X-10 DEVICES
When used in conjunction with an X-10 output device such as an NX507-E, NX508-E, NX534-E or NX540-E, this
menu allows the user to control up to ten X-10 devices from each keypad.
1) Enter [
r
]-[
4
]-[
6
]
The LCD Screen will prompt to “Select Light Number 0-9”.
2) Enter the number of the device to edit.
The LCD will display the light number on the left. On the right
side of the display it will prompt to turn the light “On” or “Off”.
3) Press the UP scroll key to turn the
device “ON” or press the DOWN scroll
key to turn the device “OFF”.
The LCD Screen will return to the prompt to “Select Light Number
0-9”.
4) Repeat steps 2 and 3 until all of the devices have been programmed as desired.
5) Press [
#
] to exit this function.
r
4 7 HOUSE CODES FOR X-10 DEVICES
When used in conjunction with an X-10 output device such as an NX507-E, NX508-E, NX534-E or NX540-E, this
menu allows the installer to program the specific X-10 unit and house codes for the ten X-10 devices for this keypad.
1) Enter [
r
]-[
4
]-[
7
]
The LCD Screen will prompt to “Please Enter Your Code”.
2) Enter [
program code
].
The LCD will display the Light number and Unit Code.
3) Enter the X-10 [
unit code
] followed by
[
r
].
The LCD Screen will now prompt for the House Code for the
device.
4) Enter the X-10 [
house code
] followed by
[
r
].
The LCD display will increment to the next Light number and
prompt for its unit code.
5) Repeat steps 3 and 4 until all of the devices have been programmed as desired.
9
