manualshive.com logo in svg

Interlogix Advent, Руководство по установке

Поделиться
Скачать
Interlogix Advent Скачать руководство пользователя страница 21

19

Commercial Burglary and Home Navigator System

Programming the Panel

Reporting Settings

Non X-10 Output 1 (menu output 33)

xx049

Non X-10 Output 2 (menu output 34)

xx050

Non X-10 Output 3 (menu output 35)

xx051

Non X-10 Output 4 (menu output 36)

xx052

Non X-10 Output 5 (menu output 37)

xx053

Non X-10 Output 6 (menu output 38)

xx054

Non X-10 Output 7 (menu output 39)

xx055

Non X-10 Output 8 (menu output 40)

xx056

Default = 0 (None)

There are 40 menu outputs per partition/area. The first 32 are X-
10 outputs, the last 8 are non X-10 outputs. All X-10 outputs 
(menu outputs 1-32) are automatically linked to X-10 devices. 
Non X-10 outputs (menu outputs 33-40) must be linked to a pro-
grammable output in order to control a light or device.

Note
All menu outputs must be programmed (learned) into the 
panel before they will function. See “Programmable Out-
put Settings”  on page 36 for more information.

Linking Non X-10 Outputs:

1. Enter the item number for the desired non X-10 output.
2. Enter the desired programmable output number (1–100), then 

press # to confirm the selection.

Light Access Code Enable

xx069

Default = 0 (Off)

If on, users must enter a valid access code before controlling 
lights. If off, an access code is not required for light control.

Turning Light Access Code On/Off:

Once the item number has been entered, enter 1 for on (access 
code required), or 0 for off. Press # to apply the new setting.

Device Access Code Enable

xx070

Default = 0 (Off)

If on, users must enter a valid access code before controlling 
devices. If off, an access code is not required for device control.

Turning Device Access Code On/Off:

Once the item number has been entered, enter 1 for on (access 
code required) or 0 for off. Press # to apply the new setting.

Latchkey Access Code Enable

xx071

Default = 0 (Off)

If on, users must enter a valid access code before accessing the 
Latchkey setting. If off, an access code is not required to access 
the Latchkey setting. For more information on Latchkey, please 
see the User’s Manual.

Turning Latchkey Access Code On/Off:

Once the item number has been entered, enter 1 for on (access 
code required) or 0 for off. Press # to apply the new setting.

Report Partition/Area Events

xx088

Default = 1 (On)

If on, the panel will report partition/area events to the central sta-
tion.

Turning Partition/Area Event Reporting On/Off:

Once the item number has been entered, enter 1 to turn partition/
area event reporting on or 0 turn reporting off. Press # to apply the 
new setting.

Cancel Event Cancels Report

xx089

Default = 1 (On)

If on, the panel will cancel the sending of an alarm report (to cen-
tral station) if the event is canceled before the alarm reporting 
delay (xx013, xx012, or xx014) expires.

Turning Cancel Event Cancels Report On/Off:

Once the item number has been entered, enter 1 to turn the setting 
on (canceled event cancels report) or 0 to turn it off. Press # to 
apply the new setting.

Print Partition/Area Events

xx091

Default = 1 (On)

If on, the panel will print partition/area events on a local printer.

To Print Partition/Area Events:

Once the item number has been entered, enter 1 (on) to enable 
printing of partition/area events or 0 (off) to disable printing of 
partition/area events. Press # to apply the new setting.

Panic Report Delay

xx012

Default = 05 Seconds

This setting allows you to specify the length of time (in seconds) 
between the time a panic alarm condition is detected, and a panic 
report is sent to the central station. This allows users time to can-
cel the report of a false alarm if setting xx089 is on.

Specifying the Panic Report Delay:

Once the item number has been entered, enter the number of sec-
onds (1–120) you wish the panel to wait before sending a panic 
report. Press # to apply the new setting.

Alarm Report Delay

xx013

Default = 05 Seconds

This setting allows you to specify the length of time (in seconds) 
between the time a non-panic and non-fire alarm condition is 
detected, and a report is sent to the central station. This allows 
users time to cancel the report of a false alarm if setting xx089 is 
on.

Specifying the Alarm Report Delay:

Once the item number has been entered, enter the number of sec-
onds (1–120) you wish the panel to wait before sending a report. 
Press # to apply the new setting.

Содержание Advent











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды