Interface Inc. ● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555
● Email:
● ORDER TOLL-FREE 800.947.5598
4
Installing DIG-USB-F (FSU) Toolkit
DIG-USB-F (FSU) Toolkit software is window PC compatible.
The DIG-USB-F (FSU) Toolkit software is both shipped with the product and obtainable on the Interface Inc. website
(www.interfaceforce.com); search DIG-USB-F.
Install the DIG-USB-F (FSU) Toolkit software by either inserting the provided CD or USB storage media into the PC or
launching the installation file downloaded from the Interface Inc. website (
The software installer ‘AutoRun’ process will start momentarily; If the CD or USB storage media ‘AutoRun’ process
does not start, navigate to the CD or USB storage media and launch the DIG-USB-F (FSU) Toolkit Setup.exe from
the installed media.
DIG-USB-F (FSU) installation software will pre-install the required USB drivers and will automatically install the USB
drivers when the DIG-USB-F hardware connects to the PC.
After the software has been installed please connect the module to the PC and see the next
section before running the DIG-USB-F (FSU) Toolkit
Connecting the Module to the Computer
Connect the DIG-USB-F module to a Windows PC with the provided USB cable.
