Interface Inc. ● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555
● Email:
● ORDER TOLL-FREE 800.947.5598
5
Using the Found New Hardware Wizard
Connecting the module will cause the following dialog windows to appear. NOTE: Different operating systems may
present different dialog windows but the dialogs shown below should allow you make the correct choices regardless
of operating system.
Note: that the DIG-USB-F shares the drivers with the DIG-USB (DSC) range of modules so the
driver is described as the DIG-USB DSC Bus.
The ‘Found New Hardware Wizard’ should now appear.
Select ‘No, not at this time’ if you are asked whether
the drivers should be searched for online.
Click ‘Next’.
Now the wizard will start searching for the drivers.
The wizard should then proceed with installing the
software drivers.
