Operating Instructions
4/8-indent crimping tool CO.236.00
Rev.: 2015-10-16
3 / 12
EN
1 General
Your Intercontec 4/8-indent crimper with a digital display is a hand-crimping tool manufactured
using state-of-the-art technology and recognised safety standards. Only use the crimper if it
is in perfect working order. Use the crimper for crimping all turned Intercontec signal and
M17 contacts for cable cross sections of 0.10 to 4.0 mm². The revolver-locator provides a
maximum of process safety and a high degree of flexibility. Only use for the intended purpose
stated in the owner´s manual.
This tool allows you to check it at testing intervals you set yourself, and recalibrate as
necessary.
The crimper features wear monitoring to increase process reliability for the user. This shows
you once the crimper has exceeded a certain level of wear.
Apart from that, the tool is equipped with a wear prediction feature. This feature shows you
when it is time to recalibrate the crimper depending on how often you have used it and the
crimping setting used.
User alteration or improper use of the crimper will invalidate the manufacturer's guarantee for
any resulting damage.
1
2
3
4
5
6
7
8
9
10
Figure 1
