interco Ergoline Aktiv, Руководство по эксплуатации

Страница: 35 / 52

ARM POSITIONING
35
E
ng
lis
h
To adjust the angle, proceed as follows:

Turn the black lever counterclockwise to open the clamping unit on one
side of the arm rest bracket�

The angle of the arm rest to the seat shell can then be adjusted�

Hold the arm rest in the desired position with one hand and secure it in
place by tightening the black clamping lever with the other hand�

This will maintain the arm rest in position�

Repeat this procedure on the other side�
4 . 3 Arm cushion, trough-shaped
Trough-shaped cushions are used to replace standard arm cushions and have
a different shape that provides a sort of cushioned trough for the patient’s arm�
Read section
4 � 2 (Arm rests, incrementally height- and angle-adjustable (stand-
ard arm upholstery)) to learn how to adjust the height and angle�
4 . 4 Lower arm restraint
Lower arm restraints are used with trough-shaped arm cushions�
To restrain the lower arms, proceed as follows:

Fold the restraint straps away from the surface of the rest�

Place the patient’s lower arm on the trough-shaped arm cushion�

If necessary, adjust the height and angle of the arm rest, as described in
section
4 � 2 (Arm rests, incrementally height- and angle-adjustable (stand-
ard arm upholstery))�

Then use the hook and loop fasteners on the restraint straps to restrain
the arm without constricting it�

Repeat this final step with the second restraint strap�

Repeat this procedure on the other side, as needed�
4 . 5 Arm rests ALULINE
Alternatively to standard arm position-
ing systems ERGOLINE can be equipped
with different arm rests from the series
ALULINE� Fix the arm rest by loosening the
clamping lever of the arm rest receptacle
on the right and left side of the seat shell,
insert the arm rest holder and tighten the
lever again� Adjustments are always done
by changing the depth of the insertion in the square pipe (Photo
1 )�
1