Interactive Technologies CueServer 2, Руководство пользователя

Страница: 157 / 431

Contact
Syntax
Command Description Return Value
Contact <number> [<range...>] Select one or more contacts
The closed state of the
selected contact(s)
Contact <station>.<number> [<range...>]
Select one or more contacts
on a specific station The closed state of the
selected contact(s)
Contact ?
Return the current selection A selection string
Abbreviation
CO
Description
Selecting Contacts
The Contact command selects one or more contacts in the system. Contacts are typically the hard-wired
contact closure inputs on a CueServer or external I/O board. Use the Contact command in conjunction with
an action command like Enable or Disable to change the enabled state of contacts. When used alone or in
logic expressions, the Contact command returns the current state of the specified contact(s).
Either a single contact number can be specified, or a range of contacts can be specified using the various
selection operators like +, -, > and ~.
The wildcard character
*
can be used as the contact number to mean all contacts for a particular station.
Working With Stations
When no station number specified, the default station is assumed. The Station command can be used to
change the default station. Unless changed by the Station command, the default station is typically Station
0, which corresponds to the built-in contacts on the CueServer itself. When a station number is specified as
part of the
Contact command, that station number will be used for the selection.
Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Page 155 of 429