Interactive Technologies CueServer 2, Руководство пользователя

Страница: 289 / 431

exe.cgi
The
exe.cgi
URL is used to execute CueScript commands on the CueServer.
The typical format of this URL is:
http://<ip-of-CueServer>/exe.cgi?cmd=<command>&<optional-parameters>
For example, the following URL will execute the command
Cue 1 Go
:
/exe.cgi?cmd=Cue+1+Go
Parameters
•
cmd=<string>
◦ A CueScript command.
◦ Special characters must be
Percent Encoded
•
def=<defaultPlayback>
(optional)
◦
1
to
32
specifies the playback that the command will default to.
◦ If this parameter is not specified, then no change will be made to the default playback for this
context (i.e., the playback will remain the same as it was after a previous command was
executed within this context).
•
usr=<contextID>
(optional)
◦
-1
specifies that a temporary context should be used.
◦
0
specifies the default context (same as used by CueServer Studio).
◦
1
to
4
specifies User 1 thru User 4 contexts (for multi-user input).
◦
5
specifies the Ethernet context.
◦
6
specifies the Serial context.
◦
7
specifies the Rule Actions context.
Note that when a command is URL-encoded, spaces must be changed to plus (
+
) characters, and other
“special” characters must use standard URL escaping methods, for example a
$
character should be
encoded as
%24
. See Percent Encoding on Wikipedia for more details.
*
Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Page 287 of 429