Interactive Technologies CueServer 2, Руководство пользователя

Страница: 154 / 431

Channel
Syntax
Command Description Return Value
Channel <number> [<range...>]
Select one or more DMX
channels The selected
channels’ value
Channel <universe>.<local> [<range...>]
Select one or more DMX
channels The selected
channels’ value
Channel ?
Return the currently selected
DMX channels
A selection string
•
<number>
◦ A global channel number from
1
to
16384
.
◦ This number addresses channels as a continuous block through all configured universes.
•
<universe>.<local>
◦ A channel number in “dotted” notation specifies both a universe number from
1
to
128
and a
channel from
1
to
512
within that universe.
◦ This dotted number addresses channels locally within each universe.
Abbreviation
C
Description
Selecting Channels
The Channel command selects one or more DMX channels in the currently active playback fader. DMX
channels are the individual control levels sent out of the CueServer to operate connected DMX lighting
fixtures. Use the
Channel command in conjunction with an action command like At , On , Off , Enable ,
Disable , Park , Unpark or Release to set channel levels, change the enable or parked state of channels, or
release them. When used alone or in logic expressions, the Channel command returns the current value of
the specified channel(s).
Either a single channel number can be specified, or a range of channels can be specified using the various
selection operators like +, -, > and ~.
Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Page 152 of 429