Interactive Technologies CueServer 2, Руководство пользователя

Страница: 390 / 431

◦
Feature
Implemented a fail-safe mechanism during streaming cue recording that prevents
runaway stream recording if the CueServer Studio client disappeared because of a network
error or program crash.
◦
Feature
The built-in Hardware Self Test function can now be accessed via the LCD Display
menu.
◦
Feature
Optimized the DMX fade engine code for increased performance in several key areas,
especially during stream recording.
◦
Feature
Optimized the CGI code for increased performance.
◦
Feature
Switching shows now clears all cached user variables and command contexts.
◦
Feature
The built-in front-panel function buttons’ default colors are now reset to defaults each
time a show is loaded for consistency.
◦
Bug
Addressed a problem that was preventing Groups from being joined using the THRU
command.
◦
Bug
Fixed a bug that could cause a crash of the fade engine if a streaming cue is updated
(instead of recorded) before the streaming cue existed yet.
◦
Bug
Fixed a bug that caused universes to not be able to be disabled if they had no output
protocol selected.
◦
Bug
Fixed a bug that caused DMX Input Restore/Fail events for the “DMX 2 Input” port on the
CS-940 to be reported as Port 3.
◦
Bug
Addressed a problem that could cause show switching to fire a WAIT command or perform
a playback auto-follow in the middle of the switch when the old show is partially unloaded.
◦
Bug
Addressed a problem that was causing a show to not be able to properly set the built-in
function button colors in its Show Loaded event during system boot time.
◦
Bug
Addressed a problem that caused a playback fader to show that Cue 0 was active after the
RELEASE command was used.
◦
Bug
Addressed several problems with show switching that would cause the show to be
restarted whenever DMX settings were changed.
◦
Bug
Addressed a problem that caused newly created shows to have improper default values for
some universe settings.
◦
Bug
Addressed a problem that caused disabled buttons, contacts or DMX input to become re-
enabled whenever any show configuration settings were changed.
◦
Bug
The Apache web server’s CGI interface is shut down during firmware updates to prevent a
race condition that occasionally caused firmware updates to fail.
Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Page 388 of 429