Interactive Technologies CueServer 2, Руководство пользователя

Страница: 169 / 431

Station
Syntax
Command Description Return Value
Station <number> Select one or more stations The selected stations
Station ?
Return the current selection The selected stations
Abbreviation
STAT
Description
When selecting Buttons, Contacts, Indicators, or Outputs on a connected station, the Station command can
be used to specify a station number instead of specifying it as part of the Button, Contact, Indicator or
Output number. The
Station command actually sets the default station(s) to be used with any of the other
selection commands when a station number is not used with the selection command. See the examples
below for clarification.
Two Ways To Select Station Objects
There are two ways to specify a station object. The first is to use dotted-notation with the selection
command. For example, to select Button 7 of Station 3, the command
Button 3.7
can be used. The the
“dot” is used to separate the station number from the object number.
The Station command provides a second way to select station objects. Using this method, the Station
command is used first to change which station (or stations) are the default, and then use the object
command to select the individual object. For example, to select Button 7 of Station 3, the command
Station 3 Button 7
can be used.
Selecting The Same Object On Multiple Stations
The Station command allows the same object on multiple stations to be selected at the same time.
Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Page 167 of 429