9
XS-IM Rev. 7/08 (SBK-XS INSTALL)
2”
2 1/2”
3”
I N S T A L L A T I O N M A N U A L
X - S T R E A M ™ S L I D E
STEP TWO:
Attach the Ladder to the Entry Section
Utilizing hardware kit XS-103-SS, attach the ladder to the entry section on the ground. Be
careful not to scratch the slide; use the cardboard box the slide arrived in for protection.
Insert the top of the ladder into the ladder receiver on the entry section and align the holes.
(See Fig. 2) Place a 3/8” lock washer over a 3/8” bolt; then flat washer then push bolt
through the pre-drilled holes in the PVC ladder into the nuts embedded in the entry section
leg receiver, and tighten.
Fig. 2: Ladder Step Support Sub-Assembly
STEP THREE:
Attach the Handrails to the Ladder and Entry Section
TIP:
Install the handrails with the logo facing out.
TIP:
Hand tighten the all-threads into the handrails only, do not use any mechanical means
such as a wrench or pliers to tighten the all-threads.
TIP:
There are six all-threads utilized on each handrail. There are 3 different lengths of all-
threads used on each handrail. See Fig. 3 to match actual size. (XS-105-SS Kit)
Fig. 3
