Intenza 550 Ti, Руководство пользователя

Страница: 21 / 44

17
4.4 Central Control Center Overview
1. Quick Start: Initiate the motor to begin at 0.8 kph and 0% elevation.
2. Incline Button: Use the incline arrow button to change the elevation. Each press of the button represents 0.5%
increment.
3.
Decline Button: Use the decline arrow button to change the elevation. Each press of the button represents
0.5% decrease in elevation.
4. Stick shift: To adjust 550 series treadmill speed, move the speed control bar upward or downward. Each
motion represents 0.1 km/h change of speed.
5. Stop / Pause: Press this key once to pause the workout. Press this key again to display workout information
and exit the workout program. The pause time is set for 3 minutes. The display will count down from 3
minutes. When the STOP button is pressed, it will go to pause mode. If Intenza 550 series treadmill is not
resumed from “Pause”, the treadmill will go back to Homepage.
6. 2 mph (Walk) Button: The preset value of this button is 2 mph / 3 kph (Walk). During a workout, press this
button to immediately change the speed to the preset value at 2 mph / 3 kph.
7. 4 mph / 6 kph (Jog) Button: The preset value of this button is 4 mph / 6 kph (Jog). During a workout, press
this button to immediately change the speed to the preset value at 4 mph / 6 kph.
8. 6 mph / 9 kph (run) Button: The preset value of this button is 6 mph / 9 kph (Run). During a workout, press
this button to immediately change the speed to the preset value at 6 mph / 9 kph.
2. Incline button
1. Quick Start
3. Decline button
5. Stop / Pause
6. 2 mph (Walk) button
7. 4 mph (Jog) button
8. 6 mph (Run) button
4. Stick shift