Intense 2022 TAZER MX, Руководство пользователя

Страница: 9 / 44

S T E P 4
INSTALL HANDLEBAR:
EXPERT BUILD
Spin the handlebar stem 180° so that the stem and
forks are facing forward (A) . Make sure the forks
are the correct way around – the front brake caliper
should be on the left (non-drive) side of the bike, with
the fork arch facing forward.
Using the 4mm Allen key remove the faceplate of
the stem and put the handlebars in place. Use the
guidelines printed on the handlebars to help position
them centrally and evenly. Check that the brake,
shifter and dropper post cables have a nice flow and
are not kinked or twisted in any way.
Replace the faceplate of the stem and reinsert the
bolts, first by hand and then with the 4mm Allen key.
Gradually tighten the bolts, making sure that the
bars are still positioned correctly and that the space
between the faceplate and the main body of the stem
is even.
When tightening the bolts follow this pattern (B) to
ensure even clamping: top left, bottom right, bottom
left, top right. Finish off using the torque wrench
to 5Nm.
A
B
17 16