Intense 2022 TAZER MX, Руководство пользователя

Страница: 31 / 44

WARNING AND ERROR MESSAGES ON THE
CYCLE COMPUTER DISPLAY
Warning and Error messages are displayed at the
top in the middle of the computer display screen.
These messages usually start with a ‘W’ and help you
identify the problem. Some of the most common error
messages can be found printed on the inside of the
battery hatch door.
WARNING MESSAGES ON DISPLAY
CODE DISPLAY PRECONDITIONS OPERATIONAL RESTRICTION REMEDY
W010
Power assisrtance may be lower
than usual.
Temperature of the drive unit is higher than it is during times of normal operation.
Stop using the assist function until the temperature of the drive unit drops. If the situa-
tion does not improve contact the place of purchase.
The maximum speed up to which power
assistance is provided may be lower
than usual.
The travelling speed cannot be detected.
Check that the speed sensor is porperly installed. If the situation does not improve
contact the place of purchase.
Power assistance may be lower
than usual.
Initialization of torque sensor was not completed successfully.
With your foot off the pedal, press the battery power button and turn on the power
again. If the situation does not improve contact the place of purchase.
Power assistance provided in (WALK)
mode may be lower than usual. The
walk assist function may not be able to
be used in certain regions.
An electronic derailleur may have been installed in place of a mechanical derailleur.
Reinstall the derailleur for which the system is configured to support. If the situation
does not improve contact the place of purchase.
W011
W013
W032
WARNING MESSAGE ON
THE DISPLAY SCREEN.
THIS DISAPPEARS ONCE
THE ERROR IS FIXED.
For a complete list of
SHIMANO Error Codes
and how to fix them scan the code.
61 60