Intense 2022 TAZER MX, Руководство пользователя

Страница: 11 / 44

S T E P 6
INSTALL
REAR WHEEL
Remove the rear brake pad spacer (A) (usually
yellow, red or orange plastic). At this stage be careful
not to pull the rear brake lever until the wheel has
been installed.
Remove any packaging left on the rear wheel,
including the large black plastic rotor guards (B) .
Be careful that the wheel spacers don’t get pulled
off by accident. If they do, just press them back into
position. Do not touch the brake rotors with your
hands or gloves, as any small amount of grease may
contaminate them and the brake pads.
Remove the rear axle with a 5mm Allen key by turning
it counterclockwise from the non-drive side. (C)
Insert the rear wheel into the frame by first positioning
the chain on the smallest cog on the cassette (D) .
For your SHIMANO equipped Tazer MX you will
need to rotate the derailleur down a little to allow you
to position the chain on the cassette more easily.
Carefully line up the rotor with the rear brake making
sure that it slides inside the caliper body between the
brake pads, and the hub spacers slide into the slots
on the frame dropouts.
Once everything is lined up and in position, reinsert
the axle. Turn with the 5mm Allen key clockwise, you
may need to apply a little inward pressure to start it
off. Torque to 11Nm (E) .
C
A
D
E
B
21 20