intend KIT BOX SERRA, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 22

17
Fix the PVC handle outside of the first profile (photo 33).
Fasten the Box to the ground using the dedicated brackets.
BASIS VERSION: The Kit Box must be fastened to the ground using the brackets placed beneath
each profile.
MOBILE VERSION: The Kit Box must be fixed to the ground using the brackets placed beneath the
last profile.
ASSEMBLING OF THE METAL BAR UNDER THE ROOF
Once the Box has been tensioned and fixed to the ground i twill be possible to measure the Box
length and to cut the metal bar in the same length as the Box length. Then, make a hole where the
bar must be fixed to the arch. In the end the bar must be fastened to the arches.
ATTENTION: other installation ways which are not contained in this manual are not
allowed, if not previously authorized by INTENDA S.r.l.
ATTENTION: the box must be fixed to the ground of to a wall. The installer must verify the
ground type and conditions and choose the appropriate anchoring system, also considering
the typical meteorological conditions of that particular place (strong wind…).
PHOTO 33
PHOTO 33