5
5 OPERATING INTERFACE
5.1 Main menu
Trigger
『
Aperture- off
』
to go to main menu, shown as Fig. 6
：
Fig. 6
When the menu pops-up , trigger the
『
Aperture- off
』
to move the cursor , use
『
near focus
』
and
『
far focus
』
to modify the values or options. When you exit the menu, parameters automatically
are saved.
1
、
Auto
：
X
Display the current image auto mode. Three options:
Auto 0
：
manual gain, manual brightness. Module won’t adjust gain
、
brightness automatically according to the observed object.
Auto 1
：
manual gain, auto brightness. User can manually adjust gain while
adjust brightness according to the observed object.
Auto 2
：
auto gain, auto brightness.
2
、
Mode
：
X
Display the current image mode. Module has ten configuration setups under
Auto2 mode.
Mode 0
and
Mode 1
are fixed factory default settings and
Mode
2-9
are user-defined settings. Details please refer to chapter 4.4.
0
：
Suitable for observation of big-object under good weather condition
1
：
Suitable for observation of target within sky-line under good weather
condition
2
～
9
：
User-defined based on different practical occasions.
3
、
G
：
XXX
Gain value, range: 0-255. This function is only effective when the auto imaging
mode setup is
Auto 0
or
Auto 1
. In
Auto 2
mode, gain is automatically adjusted.
When trigger
『
Aperture- off
』
, cursor will skip gain setup option.
