7
1
、
Com
：
XXX
Please do not change the items within this menu, or the thermal
camera may not be normally controlled.
2
、
Mode
：
XXX
use
『
near focus
』
and
『
far focus
』
to go to internal menu to setup mode
parameters, please refer to 4.4.
3
、
Modify:
For factory debugging
4
、
AF
：
X
auto-focus switch status of the current object, "N" is recommended.
Y
：
on N
：
off
5
、
RS
：
XXX
auto calibration switch status of the current object.
Long
：
long means boot to calibration one time, and correct once every
2 minutes within 10 minutes; correct once every 5 minutes within
10 to 30 minutes; correct once every 10 minutes within 30 to 1
hour; correct once every 20 minutes above 1 hour.
Short
：
short means boot to calibration one time, and correct once
every 1 minute within 10 minutes; correct once every 2 minutes
within 10 to 30 minutes; correct once every 5 minutes within 30 to
1 hour; correct once every 10 minutes above 1 hour.
Off
：
Manually calibration
6
、
Video
：
XXX
Sensitivity, three modes:
Low sensitivity: User may select Low sensitivity when the ambient
or object in high temperature
Middle sensitivity
High sensitivity: User select High sensitivity when the ambient or
object in low temperature.
7
、
GEN
：
X
Set the switch status to protect the detector from being burned
8
、
Alarm
：
X
NC
9
、
Recover
：
XXX
Recover all menus setting for factory default,
Aperture-off (M) key
for restore, and
Aperture-on (C)
key for cancel.
10
、
Exit
：
XXX
use
『
near focus
』
or
『
far focus
』
to exit the menu.
