Module Integration Manual
Page 16 of 18
Interrogator RF Board (400.00152.xxxx)
9.2.3.1 FCC Requirements
Consistent with §2.909(a),
the following text must be included within the user’s manual or
operator instruction guide for the final commercial product.
(Required OEM content data)
Operating Requirements and Conditions:
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
FCC ID:
The user manual must contain the following:
This product contains
FCCID: 2AEAE-ISAW-RF-H0215
Note: In the case where the Host / Module combination has been re-certified the FCCID shall
appear in the product manual as follows: FCCID:
(Include Standalone FCC ID)
FCC Part 15 Statement (Only Include if FCC Part 15 is Required on the End Product):
Note: This equipment has been tested and found to comply with the limits for a
(OEM to insert
device type: Class A or Class B)
digital device, pursuant to Part 15 of the FCC Rules.
(OEM
must follow Part 15 guidelines (§15.105 and §15.19) to determine additional statements
required in this section for their device class)
Installation Requirements
The INTERROGATOR RF BOARD module and approved antennas can be professionally
installed in the following installation environments:
1. Metal enclosures described in the IEEE/ANSI Std C37.20, or UL and NEMA
specifications derived from Std C37.20, as indicated in KDB 550099. The host device is
not required to be in such an enclosure since the antenna is wired away from the host.
9.2.3.2 Industry Canada Requirements
Consistent with RSP-100 (issue 10), section 3.2 the following text must be included within the
user’s manual or operator instruction guide for the final commercial product in both English and
French.
(Required OEM content data)
Operating Requirements and Conditions:
