Once connected, the cabling between the module and power supply should resemble the picture
below:
Before reconnecting power and turning
on your modular system, double check
that the ribbon cable is fully seated on
both ends and that all the pins are
correctly aligned. If the pins are
misaligned in any direction or the
ribbon is backwards you can cause
damage to your module, power supply,
or other modules.
After you have confirmed all the
connections, you can reconnect the
power cable and turn on your modular
system. You should immediately check
that all your modules have powered on and are functioning correctly. If you notice any anomalies,
turn your system off right away and check your cabling again for mistakes.
Mixup Manual
5
