Connecting Mixup to a v2 Headphones 1U Module
If you own an Intellijel Headphones 1U module (version 2 only), you can connect it directly to the
Mixup using the included link cable. To do so:
1.
Confirm you have a “version 2” Headphones 1U module.
Version 2 modules, in production since August 2019, have a 3-pin Link connecter and a jumper
on the rear panel. Version 1 modules do not.
2.
Using the included 3-wire link cable, connect one end of it to the
CHAIN-OUT
3-pin connector
on Mixup, and the other end to the 3-pin input connector on the Headphones 1U module.
3.
IMPORTANT!
On the back of the Headphones 1U module,
remove the JP1 jumper connector
and put it in a safe place
.
This jumper is what normals the
Headphones 1U module’s Left input to its Right
input. Since the Mixup module has its own
Left-to-Right normaling, 3-pin Link connections
require removal of this jumper to achieve
expected operation and optimum sonic fidelity.
4.
Mixup’s
MIX L
and
MIX R
outputs are now
duplicated directly to the left and right inputs on
your Headphones 1U module without patching
the front panels.
Mixup Manual
14
