BACK PANEL
Each Mixup module features a pair of rear panel connectors, which enable you to serially connect
multiple Mixups to create a larger mixer with more inputs, or to connect Mixup directly to the ¼”
jacks on a compatible Intellijel case, an Outs module, or a v2 Headphones 1U.
[1]
CHAIN-OUT
- This connector taps into the Left and
Right
MIX
bus outputs. Use the supplied link cable
to connect the
CHAIN-OUT
of one Mixup to the
CHAIN-IN
connector on another compatible module
(such as another Mixup; a Stereo Mix 1U; an Outs
module; or a v2 Headphones 1U).
[2]
CHAIN-IN
- This connector adds another pair of
inputs directly to the Left and Right
MIX
bus. Use
the supplied link cable to connect the
CHAIN-IN
of
one Mixup to the
CHAIN-OUT
connector on
another compatible module (such as another Mixup
or a Stereo Mix 1U). The
CHAIN-IN
connector is
essentially another input, much like “Input 4.”
The following sections illustrate a few of the many possible device connections offered by the back
panel’s pair of 3-pin LINK connectors.
IMPORTANT
: Never use the 3-wire Link cable to directly connect a
Mixup
module to an Intellijel
Pedal I/O
module. Although both modules use this same cable/connector — they serve different
purposes and carry different signals.
Mixup Manual
9
