Connecting Mixup to an Intellijel Outs Module
If you own an Intellijel Outs module, you can connect it directly to the Mixup using the included link
cable. To do so:
1.
Using the 3-wire link cable provided with your Mixup module, connect one end of it to the
CHAIN-OUT
3-pin connector on Mixup, and the other end to the 3-pin connector on the Outs
module.
2.
IMPORTANT!
On the back of the Outs module,
remove the JP1 jumper connector and put it
in a safe place
.
This jumper is what normals the Outs module’s Left input to its Right input. Since the Mixup
module has its own Left-to-Right normaling, 3-pin Link connections require removal of this
jumper to achieve expected operation and optimum sonic fidelity.
Mixup’s
MIX L
and
MIX R
outputs are now sent directly to the left and right inputs on your Outs
module without patching the front panels.
Mixup Manual
13
