(STAGE) GATE
Press
EDIT
+
(STAGE) GATE
to access the per-stage GATE override feature. This feature
overrides, on a stage-by stage basis, the
settings (including ratchets).
To edit a stage’s GATE override, press the Stage button corresponding to the Stage you wish to edit
(using the STAGE GATE screen shown below):
There is one main parameter accessible on this screen:
●
GATE OVERRIDE
: Set’s the gate length for that stage, overriding the gate length set on the
TRACK GATE screen.
As you turn the encoder clockwise, you will scroll through the following options:
‘--’ :
Tells the stage to use the TRACK GATE length value (i.e. there is no gate override
applied to the stage). This is the default value.
‘Rest’ : No gate is generated by the stage, meaning it plays a “rest.”
1-99% : The stage’s gate length, expressed as a percentage of a single clock pulse/ratchet.
‘100%’ : When turned fully clockwise, the per-stage gate is held high for the entire duration
(a “hold”), and does not go low before the sequence advances to the next stage.
NOTE: Setting a per-stage
GATE OVERRIDE
will not affect any cumulative transposition that
might be assigned. Also, any gate
GATE SCALE
function (accessed via the track’s GATE button)
will still apply to any per-stage gate length overrides.
Metropolix Manual
74
