Intelligent Weighing Technology QHD+15, Руководство по обслуживанию

Страница: 11 / 37

- 11 -
Press during the display, delete all saved accumulation data.
Automatic Accumulation
Weighing values automatically accumulate total, when the goods is
unloaded and with out key pressing.
Set the parameter
F1 off
–
print
–
au on

Place the goods on the platform

Wait few seconds for display stability and a control beep.

Unload the goods from the platform, the weighing value is added into the
memory

The scale must return to come zero or negative number before adding
another samples.

It can add up to 99 entries or until the capacity of the weight display is
exceeded.
6. Parts Counting
In order to do parts counting, it is necessary to know the average weight of the items
to be counted. This can be done either by weighing a known number of the items
and letting the scale determine the average unit weight or by manually inputting a
known unit weight using the keypad.
To count a greater number of parts the average weight per part has to be determined
with a small quantity.
The average piece weight can be increased at any time during the counting process,
by entering the displayed number of items and confirming by pressing .
Weighing a sample to determine the Unit Weight

Reset the balance to zero or tare the empty container if necessary.

Place the known quantity of items on the scale, wait few seconds for display
stable.

Enter the number of quantity by using numeric keys. Eg: 15
0 1 .5 00 - 1-
0 1 .5 00 0 1 .5 00 0 0 0
0 - 0 - 0 00
0 1 .5 00 15