Filename: QUICK_GUIDE_MIT+POR_rev1.doc; July2019
7
/
19
7.
Standby, logout, switching off functions
After inserting the power cord into the wall outlet, the device will automatically switch on
taking in the basic weighing screen.
By tapping the area with the symbol
You access the switching off menu.
There are 3 switching off modes:
Display off.
Logout.
Switching off.
Display off
Selecting the display off mode, the
device will go in the standby state; the
display is turned off, so that only the
bottom right command to turn on the
system will be enabled.
Tapping the symbol, you will return to the
basic weighing screen.
Logout
Sele
cting the
logout mode, you will
disable the current user
Tapping
“Start
”, it will activate the user
and in the case of password protected
user it will be asked you to enter it.
Tapping , you can select another
user by which you want to switch on the
device.
Switching off
Selecting the switching off command, the
device will be turned off. To turn it on, you
shall press the key on the left of the device
or remove the power plug and insert it
again.
