6
Operation
Stretch out both wet hands and insert them all the way into
the hand dryer until the dryer starts
Pull your hands out slowly, letting the air blow the water
off. This will take between 10 and 15 seconds
Pull your hands out completely
Should a malfunction or occur the self check indicator pilot light on the right hand side of
the display will either light up or flash. Alternatively an error code such as E2 may come
up on the display.
If this happens turn off the hand dryer and wait one minute until all the indicators and the
display turn off. After this time switch the power back on. If the indicator is still flashing
and/or the error code is on the display please contact the ATC Technical Department for
advice.
