5
Installation
1.
Install a wall box.
Install a flush mounting wall box as per diagram 1
NB. If a wall box is not used the power cable will
not sit flush with the wall and prevent the unit from
being firmly installed against the wall.
2.
Install the mounting panel to the wall
Install the mounting plate supplied with the hand
dryer to the wall using appropriate fixings. At least
6 fixings should be used as indicated.
Make sure wall is capable of suporting the weight
of the dryer before installing the installation panel
Connecting to Fixed wiring
1) Terminate the cable from the hand dryer into the
flush mounting wall box.
2) Attach the dryer to the wall using the 3 hooks on
the mounting panel.
3) Secure the dryer to the mounting plate with the
fixing screw in the lower right side (behind the drip
tray)
The installation screw will not tighten if the lower
hook is not completely inserted. Ensure the dryer is
fixed to the installation panel with the fixing screw
otherwise the dryer is liable to be damaged when it is
subjected to knocks etc during use.
Important
Do not operate the power or heat switches with your hands inside the dryer opening.
If the self check indicator on the display lights or is flashing, turn off the power switch,
wait 1 minute, and then turn the power switch back on
