background image

Routine Cleaning 

Cleaning the Unit body  

 

Before cleaning switch off the power to 
the hand dryer. Do not spray water on the 
hand dryer 

 

Wear gloves when cleaning the hand 
dryer. 

 

Clean the unit with a soft cloth,  
If the Unit gets very dirty clean with a soft 
cloth dampened with a neutral cleaning 
agent, and then clean with a dry soft cloth. 

 

Remove dirt from the sensor areas 

NOTE 
 

 

Only use Neutral cleaning agents 

 

Do not  use thinner, acidic,  or 
alkaline cleaners or Nylon 
brushes;  these will damage the 
finish of the unit. 

 

Only use  denatured  alcohol to 
clean the hand drying area 

 

If chemically impregnated cloths 
are used, read their instructions 
first  and  make sure  that they 
comply with the above. 

 

The antibacterial coating is effective when 
bacteria are exposed to the coated 
surfaces. The coating is not effective when 
the unit becomes very dirty 

Draining and Cleaning the Drain tank. 
(Every Week or as necessary) 

 

Empty and wash the water collection tray 
located at the bottom of the dryer 
whenever it is full or at least once per 
week  

 

If accumulated water is standing in the 
tank for too long a period it will start to 
smell. 

1.

 

Pull  the  tank out in a 
horizontal direction 
toward you. ` 

2.

 

Open the  cover  and 
empty the water from 
the tank, (pull the cover 
in the direction of the 

arrow on top of the cover. and then 
remove the cover completely. 

3.

 

Wash out the interior of the drain 
tray  

4.

 

Re-install the cover 
of the drain tray and 
re-attach to the hand 
dryer 

 

After confirming the 
tank is in the correct 
position, pour 200ml of 
water through the drain 
hole to prevent it 
clogging up. (empty the 
drain try after this procedure) 

Cleaning the Filter  (Every week  or as 
necessary) 

 

Remove the air filter by 
pulling out the filter by 
the handle 

 

To clean the air filter, 
lightly beat the edge of the filter by 
hand or use a vacuum 
cleaner 

 

If the filter is very dirty 
wash in warm soapy 
water, rinse and dry. 

 

Replace the filter back 
into the dryer, making 
sure it is inserted 
completely. Failure to use the dust 
filter will impact on the efficiency of 
the hand dryer and may affect the 
service life of the unit.  

 NOTE: 

 

If you wash the air filter make sure it is 

completely dry before placing back into 
the hand dryer.  

 

Do not expose the filter to fire or high 
temperatures as this will damage the 
filter 

 
 

 

 

 

 

 

Содержание ATC-Premblade15












Отзывы: