Intelbras Micro PABX Conecta, Руководство пользователя

Страница: 78 / 99

70
The call will be answered by the destination extension as follows:
−
Using a multifrequencial phone and entering the extension number, the call will be
forwarded directly to the extension. The destination extension will generate a
differenciated ring (a long ring).
−
If the call is not answered, it will be directed to the operator after 30 seconds.
The call will be forwarded to the call attendant in the following situations:
−
If the telephone is not multifrequencial;
−
If the caller does not follow up after his call;
−
If the extension was blocked to receive direct calls;
−
If the extension was set not to receive external calls;
−
If you enter an unavailable extension number;
−
If you enter an incorrect or incomplete extension number;
30.10.3 Receiving direct external calls
Default factory setting: All extensions are ready to receive direct calls.
Blocking direct incoming calls
Lift your extension handset, press , wait for confirmation tone.
Releasing direct incoming calls
Lift your extension handset, press , wait for confirmation tone.
30.11 Remote programming using a MF phone
Default factory setting: Remote prgramming not available.
You can use an external phone to remotely program some of the PABX features:
• Calendar; • Conferencing;
• Extensions category; • Call back ;
• Lines configuration; • Incoming call report;
• Desactivation; • Outgoing call report.
30.11.1 PABX with auto-answer
After the call is auto-answered and receives beeps or a message
Press + MAIN PASSWORD + DESIRED PROGRAMMING CODE .
If the programming is correct, you receive a continuous MF tone;
If the programming is correct, you receive a MF tone with pause.
If you want to remotely release call report and conferencing.
- Call your PABX, wait for the beeps or message (DISA);
- Press # + MAIN PA 211 + #; (to release call report ); wait for confirmation
tone and then, press 261 + #; (to enable conferencing), wait for confirmation tone.