16
2. GENERAL CONFIGURATION OF THE PABX
This chapter will cover the basic programming instructions for your PABX.
2.1 Changing the main password
Default Password Factory: 123
.
You can change the PABX password whenever necessary. Your password can
have any number combination as long as it does not exceed 3 digits.
Changing the general password
From the main extension, lift the handset, press
+
CURRENT PASSWORD
(3 digits) +
+ CURRENT PASSWORD
+
NEW PASSWORD, wait for
confirmation tone.
2.2 Command to enter PABX program mode
Some program functions of the PABX can be carried out from the main extension in
PABX programming mode.
Entering PABX program mode
From main extension, lift the handset, press
+
GENERAL PASSWORD.
From this moment you can program each feature of your PABX following the
instructions.
Exiting PABX program mode
Place the main extension handset on the hook.
2.2.1 Main Extension
The main extensions have the physical position 00 and 03 and are preprogrammed
as extension 20 and 23. The numbering can be changed but the physical position
should always be 00 e 03.
Identifying your PABX tones during programming
Ready for programming:
Continuous tone with quick intervals, similar to
the internal line tone;
Programming correct:
Slow beep sequence, similar to the tone you
receive when putting a call on hold;
All programming
functions are
followed by
commands and how
to wait for
confirmation, if you
wish to speed up
the process, press *
followed by the
next programming
codes.
When the main
password is
changed,Remote
Access
programming will
be automatically
opened.
Содержание Micro PABX Conecta
Страница 1: ...CONECTA MODULARE i Version handbook 02 07 Compatible Software 6 8...
Страница 14: ...6 CONECTA...