18
Set Line in Decadic mode ( FSK )
Lift handset, press
+
MAIN PASSWORD (3 digits ) +
+
LINE
+
, wait for confirmation tone.
Set Line in Multifrequencial mode (DTMF)
Lift handset, press
+
MAIN PASSWORD (3 digits) +
+
LINE
+
, wait for confirmation tone.
Set line to only receive calls
Lift handset, press
+
MAIN PASSWORD (3 digits) +
+
LINE
+
, wait for confirmation tone.
Set line to receive and make calls in decadic mode
Lift handset, press
+
MAIN PASSWORD (3 digits) +
+
LINE
+
, wait for confirmation tone.
Example: You want to program line 1 as route 0 to receive and make calls in
decadic mode: Enter PABX programming mode and enter 31 + 1 + 0 + 4.
Transforming a line into an internal path (for a line position without external
line or without trunk)
If one of the external line positions is not used, you can transform it into an internal
path, to improve the functionality of your PABX:
Lift handset, press
+
MAIN PASSWORD (3 digits) +
+
LINE
+
, wait for confirmation tone.
If an installed line is not used, you can block it
Lift handset, press
+
MAIN PASSWORD (3 digits ) +
+
LINE
+
, wait for confirmation tone.
Returning to factory setting in DTMF mode.
Lift handset, press
+
MAIN PASSWORD (3 digits) +
+
LINE
+
, wait for confirmation tone.
2.5 Automatic Line Selection (Only in Modulare i)
This function allows for calls within a specific category (IDD, DDD, local, local
cellular, DDD cellular), to be established through the same route, knowing that
LINE:
1, 2, 3 or
4, as per the line
you wish to
program, or 9 to
program all the
lines.
If you wish to
install a line in
the position used
as a new internal
path, you need
to configure the
line again as per
the previous
intstructions.
Содержание Micro PABX Conecta
Страница 1: ...CONECTA MODULARE i Version handbook 02 07 Compatible Software 6 8...
Страница 14: ...6 CONECTA...
