Intel Xeon L3360 Скачать руководство пользователя страница 13

Страница: 13 / 102

Datasheet

Electrical Specifications

2.1

Power and Ground Lands

The processor has VCC (power), VTT, and VSS (ground) inputs for on-chip power

distribution. All power lands must be connected to V

, while all VSS lands must be

connected to a system ground plane. The processor VCC lands must be supplied the

voltage determined by the Voltage IDentification (VID) lands.

The signals denoted as VTT provide termination for the front side bus and power to the

I/O buffers. A separate supply must be implemented for these lands, that meets the

specifications outlined in

Table 2-3

2.2

Decoupling Guidelines

Due to its large number of transistors and high internal clock speeds, the processor is

capable of generating large current swings. This may cause voltages on power planes

to sag below their minimum specified values if bulk decoupling is not adequate. Larger

bulk storage (C

BULK

), such as electrolytic or aluminum-polymer capacitors, supply

current during longer lasting changes in current demand by the component, such as

coming out of an idle condition. Similarly, they act as a storage well for current when

entering an idle condition from a running condition. The motherboard must be designed

to ensure that the voltage provided to the processor remains within the specifications

listed in

Table 2-3

. Failure to do so can result in timing violations or reduced lifetime of

the component. For further information and guidelines, refer to the appropriate

platform design guidelines.

2.2.1

Decoupling

regulator solutions need to provide sufficient decoupling capacitance to satisfy the

processor voltage specifications. This includes bulk capacitance with low effective series

resistance (ESR) to keep the voltage rail within specifications during large swings in

load current. In addition, ceramic decoupling capacitors are required to filter high

frequency content generated by the front side bus and processor activity. Consult the

Voltage Regulator-Down (VRD) 11.0 Processor Power Delivery Design Guidelines For

Desktop LGA775 Socket and appropriate platform design guidelines for further

information.

2.2.2

Decoupling

Decoupling must be provided on the motherboard. Decoupling solutions must be sized

to meet the expected load. To ensure compliance with the specifications, various

factors associated with the power delivery solution must be considered including

regulator type, power plane and trace sizing, and component placement. A

conservative decoupling solution would consist of a combination of low ESR bulk

capacitors and high frequency ceramic capacitors. For further information regarding

power delivery, decoupling and layout guidelines, refer to the appropriate platform

design guidelines.

2.2.3

FSB Decoupling

The processor integrates signal termination on the die. In addition, some of the high

frequency capacitance required for the FSB is included on the processor package.

However, additional high frequency capacitance must be added to the motherboard to

Содержание Xeon L3360







































































































Результаты поиска

Содержание Xeon L3360

Отзывы:

Похожие инструкции для Xeon L3360

Бренды по названию

Популярные бренды

Intel Xeon L3360, Техническое описание

Результаты поиска

Содержание Xeon L3360

Отзывы:

Похожие инструкции для Xeon L3360

Бренды по названию

Популярные бренды