manualshive.com logo in svg

Intel SR2100, Руководство по эксплуатации продукта

Поделиться
Скачать
Intel SR2100 Скачать руководство пользователя страница 75

Regulatory and Certification Information 

 

75 

BSMI (Taiwan) 

The BSMI ID certification number and the following EMC warning is located on the outside rear 
area of the product. 

 

Regulated Specified Components 

To maintain the UL listing and compliance to other regulatory certifications and/or declarations, the 
following regulated components must be used, and conditions adhered to.  Interchanging or use of 
other component will void the UL Listing and other product certifications and approvals.  

Updated product information for configurations can be found on Intel’s Server Builder Web-site at 
http://channel.intel.com/go/serverbuilder.  If you do not have access to Intel’s web address please 
contact your local Intel representative. 

• 

SR2100 chassis (base chassis is provided with power supply and fans)

UL listed. 

• 

Server board

you must use an Intel Server Board – UL Recognized. 

• 

Add-in boards

must have a printed wiring board flammability rating of minimum UL94V-1.  

Add-in boards containing external power connectors and/or lithium batteries must be UL 
Recognized or UL Listed.  Any add-in board containing modem telecommunication circuitry 
must be UL Listed.  In addition the modem must have the appropriate telecommunications, 
safety and EMC approvals for the region in which it is sold.  

• 

Peripheral storage devices

must be UL recognized or UL listed accessory and TUV or VDE 

licensed.  Maximum power rating of any one device is 19W.  Total server configuration is not 
to exceed maximum loading conditions of power supply. 

 

When using a UL Recognized Peripheral Storage Device, the plastic bezel must be made of 
a UL recognized plastic with flammability rating of UL94V-1. 

Содержание SR2100

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды