Intel SR2100, Руководство по эксплуатации продукта, Страница: 51 / 96

Installing the System in a Rack 51
8. Extend the right and left rails (Figure 36, A) so they fully extend in front of the cabinet rack and
slide the bearing insert (inside the rails) to the front of the rails. The rail system is now ready to
receive the chassis.
A A
OM09141
Figure 36. Extending the Rails
9. Lift the chassis with its front facing you and carefully guide the inner rail (Figure 37, A) that is
mounted to the chassis system, into the outer pieces (B) you attached in previous steps.
Gently move the system evenly towards the rear of the cabinet until it locks. Press the brass
colored finger tabs located in the center of each inner side rail piece to slide the chassis all the
way back. If you feel resistance as you slide the chassis, loosen the front mounting screws and
retighten them to adjust for width.
OM09143
A
B
Figure 37. Guiding the Chassis into the Rack