manualshive.com logo in svg

Intel SR1695GPRX, Руководство по обслуживанию

Intel SR1695GPRX - мощный серверный компьютер от Intel, обеспечивающий высокую производительность и надежность. Чтобы узнать подробности по обслуживанию и настройке, скачайте бесплатное руководство по обслуживанию на manualshive.com. Узнайте все возможности этого продукта и эффективно его использовать.

Поделиться
Скачать
background image

 

Intel

® 

Server System SR1695GPRX Service Guide

131

Electromagnetic Compatibility Notices

FCC Verification Statement (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.

For questions related to the EMC performance of this product, contact:

Intel Corporation

5200 N.E. Elam Young Parkway

Hillsboro, OR 97124-6497

1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment to an outlet on a circuit other than the one to which the 
receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could 
void the user's authority to operate the equipment. The customer is responsible for 
ensuring compliance of the modified product.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply 
with FCC Class A or B limits may be attached to this computer product. Operation with 
noncompliant peripherals is likely to result in interference to radio and TV reception.

All cables used to connect to peripherals must be shielded and grounded. Operation with 
cables, connected to peripherals, that are not shielded and grounded may result in 
interference to radio and TV reception.

Содержание SR1695GPRX















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SR1695GPRX

Cabletron Systems MicroMMAC 22ES Installation Manual preview
MicroMMAC 22ES
Бренд: Cabletron Systems Страницы: 93
Omneon MediaDeck Installation Manual preview
MediaDeck
Бренд: Omneon Страницы: 2
nvent SCHROFF 11850-016 User Manual preview
SCHROFF 11850-016
Бренд: nvent Страницы: 18
Vxl Itona C23S Specifications preview
Itona C23S
Бренд: Vxl Страницы: 2
Moxa Technologies NPort P5250A Series Quick Installation Manual preview
NPort P5250A Series
Бренд: Moxa Technologies Страницы: 2
IBM System x3650 M4 BD Type 5466 Installation And Service Manual preview
System x3650 M4 BD Type 5466
Бренд: IBM Страницы: 786
IBM 419452u - Servers System X3250 M2 Xeon... Installation Manual preview
419452u - Servers System X3250 M2 Xeon...
Бренд: IBM Страницы: 84
Magnimage LED-F816-3D User Manual preview
LED-F816-3D
Бренд: Magnimage Страницы: 42
Rasilient ApplianceStor 75 User Manual preview
ApplianceStor 75
Бренд: Rasilient Страницы: 24
Fujitsu PRIMERGY Econel 230R S1 Service Supplement Manual preview
PRIMERGY Econel 230R S1
Бренд: Fujitsu Страницы: 53
Fujitsu Primergy ECONEL 100 S2 Start Manual preview
Primergy ECONEL 100 S2
Бренд: Fujitsu Страницы: 8
Fujitsu PRIMERGY Econel 200 S2 Options Manual preview
PRIMERGY Econel 200 S2
Бренд: Fujitsu Страницы: 65
Fujitsu PRIMERGY MX130 S1 Operating Manual preview
PRIMERGY MX130 S1
Бренд: Fujitsu Страницы: 85
Fujitsu PRIMERGY Econel 100 Operating Manual preview
PRIMERGY Econel 100
Бренд: Fujitsu Страницы: 64
Fujitsu primergy h250 Manual preview
primergy h250
Бренд: Fujitsu Страницы: 105
Fujitsu Primergy N800 Manual preview
Primergy N800
Бренд: Fujitsu Страницы: 142
Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual preview
PRIMERGY GX2460 M1
Бренд: Fujitsu Страницы: 251
Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual preview
PRIMERGY MX130 S2 Upgrade and maintenance manua
Бренд: Fujitsu Страницы: 256

Бренды по названию

Популярные бренды

Загрузить еще бренды