Intel SR1695GPRX, Руководство по обслуживанию

Страница: 26 / 174

6 Intel
®
Server System SR1695GPRX Service Guide
NOTE: Blink rate is ~ 1Hz at 50% duty cycle.
Table 5. System Status LED Operation
S0 ACPI Solid on System and the operating system are up and running.
State Power Mode LED Description
LED Color State Description
Off N/A Not ready Power off or BMC initialization completes if no degraded,
non-critical, critical, or non-recoverable conditions exist
after power cable plug in.
Green/Amber Both solid on Not ready Pre DC Power On – 15-20 second BMC Initialization when
AC is applied to the server. The system will not POST until
BMC initialization completes.
Green Solid on Ok System ready.
Blink Degraded BIOS detected:
1. Unable to use all of the installed memory (more than
one DIMM installed).
1
2. In a mirrored configuration, when memory mirroring
takes place and system loses memory redundancy.
This is not covered by (2).
1
3. PCI Express* correctable link errors.
Integrated BMC detected
1. Redundancy loss such as a power supply or fan.
Applies only if the associated platform subsystem
has redundancy capabilities.
2. CPU disabled – if there are two CPUs and one CPU
is disabled.
3. Fan alarm – Fan failure. Number of operational fans
should be more than minimum number needed to
cool the system.
4. Non-critical threshold crossed – Temperature,
voltage, power nozzle, power gauge, and
PROCHOT2 (Therm Ctrl) sensors.
5. Battery failure.
6. Predictive failure when the system has redundant
power supplies.