Intel SBX44 - Server Compute Blade, Инструкция по установке и эксплуатации

Страница: 82 / 92

70
Intel® Server Compute Blade SBX44: Installation and User’s Guide
10.
Reinstall the IDE drive trays. Tighten the four screws (A) on each tray.
✏
NOTE
If an I/O expansion card is installed in place of an IDE drive, then reinstall the I/O
expansion card tray and tighten the screws.
11.
Reconnect the three flex ribbon cables (A) to the connectors on the underside of the I/O board.
✏
Important
✏
Flex ribbon cables can be damaged if not properly handled during reconnection. Use the
following recommended procedure to reconnect a flex ribbon cable to its I/O board
connector:
a.
Carefully bend each flex ribbon cable around the piano hinge on the I/O board.
b.
Gently insert each flex ribbon cable into its appropriate connector on the I/O board,
taking care to line up the cable connector correctly with the I/O board connector.
c.
Once all the flex ribbon cables have been reconnected, ensure each cable connector
has achieved flush contact with its respective I/O board connector by pressing firmly
on the flex cable backer board.
Reconnect the power cable to the connector (B) on the topside of the I/O board. Tuck the power
cable into the two hooks (C) on the underside of the I/O board. Swing the I/O board assembly
down (D). It should snap into place. Reinstall the clear plastic air baffle (E).
TP00462
A