Intel SBX44 - Server Compute Blade, Инструкция по установке и эксплуатации

Страница: 54 / 92

42
Intel® Server Compute Blade SBX44: Installation and User’s Guide
xx
CAUTION:
Hazardous energy is present when the blade is connected to the power source. Always
replace the blade cover before installing the blade.
3.
Reinstall the blade server into the system chassis.
4.
Turn on the blade server.
5.
For certain options, run the blade server Configuration/Setup Utility program.
✏
NOTE
If you have just plugged the power cords of your system chassis into electrical outlets, you
will have to wait until the power-on LED on the blade server flashes slowly before pressing
the power-control button on a blade server.
Installing the blade server bezel assembly
Complete the following steps to install the blade server bezel assembly.
1.
Review the information in “General Safety” and “Electrical Safety” beginning on page vi and
“Installation guidelines” on page 19.
2.
Connect the control-panel cable (A) to the control-panel connector (B) on the system board.
TP00449
A
B